Keenplas ST Clear
₱120.00 – ₱225.00
A transparent plastisol ink ideally for printing on light ground substrates. Easier to print and has a softer hand feel.
▪ Soft-hand feel with good washing fastness
▪ Good printability and stability on screen, easier to print
▪ Low cure, phthalate-free ink
▪ Does not clog the screen
Can't find what you need?
Keep scrolling for additional information
Print according to color sequence. A ready-mixed base is recommended to beginners on screen-printing. Otherwise, you can mix the color yourself. Just ensure not to incur over-pigment load.
To achieve a smooth surface print, heat press curing is recommended.
To achieve good color opacity and brilliance during screen-printing (manual), maintain medium pressure and speed with a 45º to 60º angle.
Keep the screen wet by flooding the screen with just the right amount of ink or keep the screen clean.
This technical data sheet does not replace the Safety Data Sheet and should be used according to its recommended purpose. Any person using the product other than that specifically recommended does so at his own risk.
While we endeavor to ensure that all recommendations about our products are correct, many factors may affect the application of the product. It is advised that the quality of the substrate, the condition of the curing method, and other printing characteristics brilliance before mass production.
The information and recommendation in this publication are to the best of our knowledge, information, and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or implied.
In all cases, it is the responsibility of users to determine the applicability of such information or the suitability of any products for their own particular purpose. Therefore, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage incurred out of the use of the product.
The information contained herein is liable to modification from time to time in light of continuous product development or improvements.