0

Cart

0
Subtotal: 0.00
No products in the cart.
0

Your Cart

0
Subtotal: 0.00
No products in the cart.

Arbitrend Pearl Gold Royal

165.00315.00

Achieve an elegant gold print to emphasize grace and bring out an eye-catching pearlescent gold finish to prints. This base can be printed directly onto the substrate and does not require an underbase print.

▪ Soft-hand feel with good washing fastness
▪ Good printability and stability on screen
▪ Easy clean-up with soap and water
▪ Fashion-base effects with bright finish

  • Application

  • ▪ Direct to substrate textile printing, not to be printed as underprint. For cut-piece articles and ready-to-wear.
    ▪ Not to be printed on top of plastisol/Keenplas series.
  • Material Compatibility

  • ▪ 100% Cotton
    ▪ 50/50 Cotton-polyester blend/synthetic fiber
    ▪ Calico/Canvas
  • Recommended Curing Parameters

  • Heat Press Machine 10 seconds | 110°C (230°F)
    Oven Type 2-3 minutes | 100°C – 130°C (212°F-248°F)
    Flash Cure 3-5 seconds | 95°C-110°C (203°F-230°F)
  • Emulsion & Mesh

  • Emulsion: Photoflash 300 Series
    Screen Mesh in CM: 100T – 120T, Monofilament
  • Additives

  • Thickener ASE 1% – 2%
    Reducer CT 1% – 2%
    Fixer MR15 Optional (2% – 3%)
  • Squeegee

  • More Ink Deposit Less Ink Deposit
    Medium (65-75 durometer) Soft (50-60 durometer)
    Hard (80-90 durometer) Round (bull-nose)
    Square (straight edge)
▪ Direct to substrate textile printing, not to be printed as underprint. For cut-piece articles and ready-to-wear.
▪ Not to be printed on top of plastisol/Keenplas series.
▪ 100% Cotton
▪ 50/50 Cotton-polyester blend/synthetic fiber
▪ Calico/Canvas
Heat Press Machine 10 seconds | 110°C (230°F)
Oven Type 2-3 minutes | 100°C – 130°C (212°F-248°F)
Flash Cure 3-5 seconds | 95°C-110°C (203°F-230°F)
Emulsion: Photoflash 300 Series
Screen Mesh in CM: 100T – 120T, Monofilament
Thickener ASE 1% – 2%
Reducer CT 1% – 2%
Fixer MR15 Optional (2% – 3%)
More Ink Deposit Less Ink Deposit
Medium (65-75 durometer) Soft (50-60 durometer)
Hard (80-90 durometer) Round (bull-nose)
Square (straight edge)

Series Description

The special effect ink designed to be the true fashion base. It is the go-to ink designed to attract attention. The series’ various textures and unique print outputs give off a ‘wow’ factor to an otherwise plain surface print.

Cleanup

Wash materials used with soap and water. Observe all local regulations when disposing of this substance.

Storage Condition

Store tightly covered at temperatures between 10°C – 30°C (50°F – 86°F) and a relative humidity between that of 25% to 70%. Keep away from direct sunlight or high temperatures.

Can't find what you need?
Find the dealer nearest you.

Keep scrolling for additional information

Additional Information

Print according to color sequence. A ready-mixed base is recommended to beginners on screen-printing. Otherwise, you can mix the color yourself. Just ensure not to incur over-pigment load.

To achieve a smooth surface print, heat press curing is recommended.

To achieve good color opacity and brilliance during screen-printing (manual), maintain medium pressure and speed with a 45º to 60º angle.

Keep the screen wet by flooding the screen with just the right amount of ink or keep the screen clean.

Important Note

This technical data sheet does not replace the Safety Data Sheet and should be used according to its recommended purpose. Any person using the product other than that specifically recommended does so at his own risk.

While we endeavor to ensure that all recommendations about our products are correct, many factors may affect the application of the product. It is advised that the quality of the substrate, the condition of the curing method, and other printing characteristics brilliance before mass production.

Disclaimer

The information and recommendation in this publication are to the best of our knowledge, information, and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or implied.

In all cases, it is the responsibility of users to determine the applicability of such information or the suitability of any products for their own particular purpose. Therefore, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage incurred out of the use of the product.

The information contained herein is liable to modification from time to time in light of continuous product development or improvements.

Scroll to Top