Reducer CT

Packaging: 20K, 4K, 1K, 500g, 250g, 125g

Used in water-based inks to decrease its viscosity. It can also delay in the drying time of the inks.

  • Application
Direct to water-based inks.
  • Material Compatibility
Water-based inks
  • Maximum Percentage
1% ~ 2%
  • Material Type
Additive
  • Browse through our...

Cleanup

Wash materials used with soap and water. Observe all local regulations when disposing of this substance.

Storage Condition

Store tightly covered at temperatures between 10ºC – 30ºC (50ºF – 86ºF) and a relative humidity between that of 25% to 70%. Keep away from direct sunlight or high temperatures.

Find the dealer nearest you.

Keep scrolling for additional information

Additional Information

The characteristics of the ink may drastically change if the application of the additives goes beyond the recommended percentage.

Important Note

This technical data sheet does not replace the Safety Data Sheet and should be used according to its recommended purpose. Any person using the product other than that specifically recommended does so at his own risk.

While we endeavor to ensure that all recommendations about our products are correct, many factors may affect the application of the product. It is advised that the quality of the substrate, the condition of the curing method, and other printing characteristics be considered before mass production.

Disclaimer

The information and recommendation in this publication are to the best of our knowledge, information, and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or implied. In all cases, it is the responsibility of users to determine the applicability of such information or the suitability of any products for their own particular purpose.

Therefore, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage incurred out of the use of the product.

The information contained herein is liable to modification from time to time in light of continuous product development or improvements.
Scroll to Top