Anti-tack

Packaging: 4K, 1K, 250g

It is an auxiliary chemical that is applied to the surface of a print prior to foil transfer.

  • Application
Used in relation to Arbitrans KL.
  • Material Compatibility
Not mixed with inks
  • Maximum Percentage
Not applicable
  • Material Type
Auxiliary Chemical
  • Browse through our...

Cleanup

Wash materials used with soap and water. Observe all local regulations when disposing of this substance.

Storage Condition

Store tightly covered at temperatures between 10ºC – 30ºC (50ºF – 86ºF) and a relative humidity between that of 25% to 70%. Keep away from direct sunlight or high temperatures.

Find the dealer nearest you.

Keep scrolling for additional information

Additional Information

Anti-tack can be printed directly onto sections of the substrate where transfer paper is unwanted. It can also be printed on top of prints.

Important Note

This technical data sheet does not replace the Safety Data Sheet and should be used according to its recommended purpose. Any person using the product other than that specifically recommended does so at his own risk.

While we endeavor to ensure that all recommendations about our products are correct, many factors may affect the application of the product. It is advised that the quality of the substrate, the condition of the curing method, and other printing characteristics be considered before mass production.

Disclaimer

The information and recommendation in this publication are to the best of our knowledge, information, and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or implied. In all cases, it is the responsibility of users to determine the applicability of such information or the suitability of any products for their own particular purpose.

Therefore, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage incurred out of the use of the product.

The information contained herein is liable to modification from time to time in light of continuous product development or improvements.
Scroll to Top